The HP30 utilizes the same offset cam design as the Iron Cobra Power Glide. The offset cam offers increased power and speed as the beater reaches the end of the stroke. The beater angle can be easily adjusted, a feature that is usually found only on more expensive pedals. The DS30 beater offers two different sounds: by rotating the beater head, you can choose felt for a softer controlled sound, or plastic for a louder and punchier sound.

The Cobra Jr. was developed with the same design concept as the Iron Cobra, offering high performance at an affordable price. The new flat surface of the footboard offers enhanced control for slide technique, and the re-designed Power Glide cam shape allows for much lighter and smoother footwork. Both the HP300 and HP300TW can be retrofitted for even faster footboard return with TAMA's Cobra Coil.

Iron Cobra Bass Pedals have been around for quite some time, and their design has always been evolving ever since their introduction in 1994. These pedals have several features that cannot be found on other products:

• Cobra Coil - A steel spring under the footboard that automatically returns it to its original position after each stroke. Can be adjusted to any point along the footboard.
• Oiles Bearing Hinge - creates less friction than traditionally-used ball bearings, increasing smoothness
• Para-Clamp II - Keeps the bass pedal flat on the floor regardless of bass drum angle. Tightening screw is extended so you don't have to reach under the pedal to adjust.
• Spring Tight- a half-moon shaped spring tension rod keeps the main pedal spring from twisting, which would result in a loss of tension
• Speedo Ring - replaces the traditional nylon rocker cam with a built-in ball bearing rocker. Easy to set up and break down, and allows pedal to be stored in case without removing the beater
• Completely Adjustable - the footboard angle, beater shaft angle, and beater head angle can all be adjusted, giving you absolute control over the feel of the pedal.

Flexi Glide Cam - many players still prefer the feel and give of the traditional strap rather than a chain. Tama recognizes this, and has done one better by creating a strap from Kevlar, the same material used in bulletproof vests, which is far more durable than nylon or leather.

Each Iron Cobra pedal comes with a hard case, letting you protect your investment while on the road.

Iron Cobra Bass Pedals have been around for quite some time, and their design has always been evolving ever since their introduction in 1994. These pedals have several features that cannot be found on other products:

• Cobra Coil - A steel spring under the footboard that automatically returns it to its original position after each stroke. Can be adjusted to any point along the footboard.
• Oiles Bearing Hinge - creates less friction than traditionally-used ball bearings, increasing smoothness
• Para-Clamp II - Keeps the bass pedal flat on the floor regardless of bass drum angle. Tightening screw is extended so you don't have to reach under the pedal to adjust.
• Spring Tight- a half-moon shaped spring tension rod keeps the main pedal spring from twisting, which would result in a loss of tension
• Speedo Ring - replaces the traditional nylon rocker cam with a built-in ball bearing rocker. Easy to set up and break down, and allows pedal to be stored in case without removing the beater
• Completely Adjustable - the footboard angle, beater shaft angle, and beater head angle can all be adjusted, giving you absolute control over the feel of the pedal.

Power Glide Cam - this cam is double chained, and features an offset design which makes the beater obtain faster velocity near the end of the stroke, delivering more punch with each note.

Each Iron Cobra pedal comes with a hard case, letting you protect your investment while on the road.

Iron Cobra Bass Pedals have been around for quite some time, and their design has always been evolving ever since their introduction in 1994. These pedals have several features that cannot be found on other products:

• Cobra Coil - A steel spring under the footboard that automatically returns it to its original position after each stroke. Can be adjusted to any point along the footboard.
• Oiles Bearing Hinge - creates less friction than traditionally-used ball bearings, increasing smoothness
• Para-Clamp II - Keeps the bass pedal flat on the floor regardless of bass drum angle. Tightening screw is extended so you don't have to reach under the pedal to adjust.
• Spring Tight- a half-moon shaped spring tension rod keeps the main pedal spring from twisting, which would result in a loss of tension
• Speedo Ring - replaces the traditional nylon rocker cam with a built-in ball bearing rocker. Easy to set up and break down, and allows pedal to be stored in case without removing the beater
• Completely Adjustable - the footboard angle, beater shaft angle, and beater head angle can all be adjusted, giving you absolute control over the feel of the pedal.

Rolling Glide Cam - this cam is double chained, and features an traditional round design which gives the beater a smooth, uniform stroke from beginning to end.

Each Iron Cobra pedal comes with a hard case, letting you protect your investment while on the road.