3/8" x 33" Goose Neck Cymbal Rod

The Tama CCA30 Boom Cymbal Arm and Clamp features a MC61 multi-clamp for durability and connects a CCA30 cymbal arm to stands ranging from 19.1mm to 29.6mm in diameter. This allows you to add another cymbal to your setup without the extra bulk of another cymbal stand.

The StageMaster Straight Single-Braced Cymbal Stand has several features:

• Reversible Bottom - The cymbal bottom protects the cymbal's center hole from the tilter's shaft and threads. If part of the nylon sleeve wears out, you can continue to use the cymbal bottom by turning it upside down.
• Cymbal Mate - You can choose two Cymbal Mate positions for Ride or China cymbals: Flat up for a looser fit or down for a tighter fit.
• Noiseless Design - All TAMA cymbal stands in the Roadpro and Stage Master lineups were designed with the elimination of stand noise a top priority. A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.

The StageMaster Straight Double-Braced Cymbal Stand has several features:

• Reversible Bottom - The cymbal bottom protects the cymbal's center hole from the tilter's shaft and threads. If part of the nylon sleeve wears out, you can continue to use the cymbal bottom by turning it upside down.
• Cymbal Mate - You can choose two Cymbal Mate positions for Ride or China cymbals: Flat up for a looser fit or down for a tighter fit.
• Noiseless Design - All TAMA cymbal stands in the Roadpro and Stage Master lineups were designed with the elimination of stand noise a top priority. A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.

The StageMaster Boom Single-Braced Cymbal Stand has several features:

• Reversible Bottom - The cymbal bottom protects the cymbal's center hole from the tilter's shaft and threads. If part of the nylon sleeve wears out, you can continue to use the cymbal bottom by turning it upside down.
• Cymbal Mate - You can choose two Cymbal Mate positions for Ride or China cymbals: Flat up for a looser fit or down for a tighter fit.
• Noiseless Design - All TAMA cymbal stands in the Roadpro and Stage Master lineups were designed with the elimination of stand noise a top priority. A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.
• Boom/Straight Converter - If there's no room for a boom stand, the boom fits neatly into the upper tube and becomes a straight stand.

The StageMaster Boom Double-Braced Cymbal Stand has several features:

• Reversible Bottom - The cymbal bottom protects the cymbal's center hole from the tilter's shaft and threads. If part of the nylon sleeve wears out, you can continue to use the cymbal bottom by turning it upside down.
• Cymbal Mate - You can choose two Cymbal Mate positions for Ride or China cymbals: Flat up for a looser fit or down for a tighter fit.
• Noiseless Design - All TAMA cymbal stands in the Roadpro and Stage Master lineups were designed with the elimination of stand noise a top priority. A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.
• Boom/Straight Converter - If there's no room for a boom stand, the boom fits neatly into the upper tube and becomes a straight stand.

Features:

• Quick Set Tilter
• Nylon Washers
• Noiseless Design
• Die-Cast Joints
• Double Braced

Features:

• Quick Set Tilter
• Nylon Washers
• Boom/Straight Convertable Tilter
• Noiseless Design
• Die-Cast Joints
• Double Braced

Features:

• Detachable Counter Weight
• 28.6mm Diameter Base Section Tubing
• Boom Arm Length : 580mm (22-3/4")
• Double Braced Leg

The Roadpro Combination Tom/Cymbal Stand allows you to slim your hardware requirements by using the same stand to hold a tom and a cymbal. This stand still includes all of the features that TAMA includes with its Roadpro equipment:

• Movable Tom Positioning: By loosening the bolt on the tom holder, toms can be easily adjusted forward and back (60mm maximum).
• Quick Set Tilter: The toothless Quick-Set Tilter securely holds its position using the friction of six metal disc plates instead of traditional gears, so you can adjust it to any desired angle. This mechanism also has a more durable structure than a conventional gear tilter.
• Omni-Ball Tom Angle Adjustment: Achieve almost any angle by loosening one T-nut.
• Noiseless Design: A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.

Features:

• Quick Set Tilter
• Nylon Washers
• Omni-ball Tom Angle Adjustment
• Noiseless Design
• Die-Cast Joints
• Double Braced

The Tama MCA53 Cymbal Arm Attachment connects to stands ranging from 19.1mm to 29.6mm in diameter. This allows you to add another cymbal to your setup without the extra bulk of another cymbal stand.

Yamaha's Crash Cymbal Holder features rubber coated, curved metal that you can set your pair of crash cymbals into in between crashes and allows them to be quickly and easily accessible. This stand top is one-tier and fits into any 7/8" to 1" openings so finding a bottom stand to fit is incredibly easy.