The Ahead Armor Cases Standard Drum Mat is 78" long and 62" wide, easily fitting under a typical drum set. Gel backing provides additional protection between your drums and the floor. Storing this mat is also simple - it folds in half, and then rolls up into a compact package. It will not come unraveled because of the snap lock quick release handle. Less is more, especially when you have to carry all of your drums along with this mat.

The Ahead Armor Cases Double Drum Mat is 107" long and 62" wide, easily fitting under a very large drum set. Gel backing provides additional protection between your drums and the floor. Storing this mat is also simple - it folds in half, and then rolls up into a compact package. It will not come unraveled because of the snap lock quick release handle. Less is more, especially when you have to carry all of your drums along with this mat.

Bass Drum O's Bass Head Hole Cutter, just precisely what it's name says, it uses a metal peg to cut a smooth and seamless hole in your bass drum head. The sharp peg can be put in one of the many different holes to determine the size you want to cut out.

The DW Drum Rug will keep your drum set from sliding around during a live performance. Rolls up easily for transportation while also carrying your hardware.

SM101 Two-Way Beater

Medium Felt Bass Drum Beater (includes beater shaft weight)

Medium Felt Bass Drum Beater (includes beater shaft weight)
The patented HardCore™ Beater utilizes a hard plastic core embedded in soft foam rubber. The unique design allows finite adjustability between the two materials. This allows velocity-sensitive action that can be adjusted to each player’s needs.

The EZ Mount Cymbal/Snare Mic Holder eliminates the needs for bulky stands or claw attachments to mic your drum set. This microphone holder is compact and can be left attached to the hardware of your drums or stand as long as you desire.
Microphone and clip are not included.

The EZ Mount Hi-Hat Mic Holder eliminates the needs for bulky stands or claw attachments to mic your drum set. This microphone holder is compact and can be left attached to your hi-hat stand as long as you desire.
Microphone and clip are not included.

Made from a durable aramid fiber/polyester laminate, the center of the AF Patch is solid for maximum durability and enhanced attack, while four radial slits along its perimeter allow the head to vibrate naturally for better tone, sustain, and feel.

Evans patches are each designed to achieve the optimum balance between protection and tone, enhancing both and sacrificing neither.

The Black Nylon EQ Patch softens attack and warms the tone.

Evans patches are each designed to achieve the optimum balance between protection and tone, enhancing both and sacrificing neither.

The Black Nylon EQ Patch softens attack and warms the tone.

Bass Pedal Generic Spring - 2 Pack

7/8" diameter post with adjustable boom and 9.5mm ratchet L-Rod for mounting cowbells, blocks, tambourines and other accessories.

The

Gibraltar Cowbell Mount secures your cowbell to your bass drum hoop to keep your cowbell within easy reach.

9.5mm (5/16") post with "U" clamp and wing screw.

The hard felt head on the top of this beater will give your bass drum medium attack, and a warm, round sound. The metal shaft will fit into most kick pedals.

The solid wooden head on the top of this beater will give your kick drum maximum attack and volume. The metal shaft will fit into most kick pedals.

This standard hi-hat clutch will fit on most entry-level stands.

Allows two cymbals (of any size) to be placed on top of each other with boom angle between them. Mounts on most 6mm and 8mm cymbal stand tops.

Fits into metal bass drum hoop under drum pedal hoop clamp.

This accessory lifts your small bass drum (18"-20") two inches off of the ground in order to let your bass drum pedal strike the correct place on the head. The platform connects on the counterhoop of the batter head side, exactly where your pedal goes, and the pedal itself will attach to the bottom segment of the platform. Foam padding is included to eliminate any metal-metal or metal-wood contact. The spurs on the other side of your bass drum should extend far enough to keep the raised drum parallel to the ground.

This strip of felt is 2.25" wide, and will fully cover the outer edge of any drum head up to 26" in diameter. Use this strip to remove high overtones and ring from the head, giving you a punchier, drier bass sound. Adhesive material is not included, but will be needed to attach the strip to the head.

These vinyl pads mount directly onto the playing zone of your bass drum, removing some of the overtones naturally produced by the head. They also serve double-duty, helping to protect the head itself from wear.

Protect your drums with Gibraltar's Rubber Drum Bumper. It fits over the drum hoop to stop rims and drums from hitting against each other.

Allows you to play cowbells, wood blocks, and other hand percussion with your feet. Explore the art of left-foot clave!

The Gibraltar SC-CBPM Cowbell Bass Drum Pedal Mount - mounts cowbells, blocks or tambourines to an adjustable floor stand that accepts most bass drum pedals.

The

Gibraltar Bass Drum Claw Hook secures your bass drum hoop to the shell

This effects pack creates the desired "Chik" sound when used with the Hi Hat Off Time Attachment (SC-HHOT) making this unit a complete solution. Add a second layer to your sound with the SC-HHOTPK Hot Hat complete kit with Chik Pack or if you already have a Hot Hat, just add the Chik Effects Package model SC-CKPK.

Fits 12.7mm rods. Great for adding second cymbal to boom stands.

Deluxe Cymbal Tilter Attachment with swivel

Deluxe add on cymbal brake tilter. Fits onto cymbal stand boom rod.