View more images
The Dynasty 15" Active PA speaker is a full range powered speaker enclosure. It contains both a 15" speaker and a radial horn. The internal power amplifier provides 350 watts of power to the main speaker and 50 watts of power to the HF horn. The entire enclosure is molded plastic and designed to sit upright or on its side in a "monitor position". The speaker also comes with a built in handle on the side. The Dynasty PA accepts both 1/4" and XLR inputs and contains and XLR output for chaining multiple speakers together. There is a 3 band parametric EQ onboard, as well as a separate gain and volume control for the speaker. This speaker works very well in a multi speaker setup as well as a stand alone unit that can be used with a microphone, synthesizer, or other electronic device (such as an iPod) plugged directly in. This is a highly versatile and reliable speaker that has constant uses within a school music program.
Sub-Bass way active Speaker System, Aluminum Alloy speaker enclosure, Frequency Response: 40Hz – 125Hz, Maximum SPL: 125dB, 15” low frequency woofer, Input Connections: 1/4in jack or XLR,350 Watt Low Frequency Class H , Amplifier, Dimensions: 19”W x 29.25”H x 18.5” W, Weight: 75 lbs.
Stereo Power Amplifier
18" Passive Subwoofer
Element; Moving Coil Dynamic, Polar Pattern: Cardioid, Frequency: 60 – 17,000 Hz, Senstivity: -72Db +/- 3 dB, (0 dB = 1 ubar @ 1KHz), Impedance: 250 Ohms +/- 30% (@ 1 KHz), Switch: Sliding On/Off, Maximum Input SPL: 135dB SPL, (1 KHz (calculated), Signal to Noise Ratio: Over 65 dB, Connector: XLR, Material: Zinc die cast
The Dynasty DMC110 is a mini-condenser microphone ideal for close miking instruments. Designed initially for drum miking, the DMC110 is also well suited for miking individual wind instruments such as saxophone, trombone, or trumpet. The mini-condenser comes with a shock mount mini-gooseneck clip which provides easy placement and a very low profile. This allows the performer to clip the microphone directly to the instrument and keep the mic close to the sound source to minimize bleed from surrounding instruments. The DMC110 comes with a built in extension cable and XLR connector. While its uses are virtually unlimited, the DMC110 work ideally for individually miking toms or snare drums, hand drums, or small clusters of percussion instruments such as temple blocks. The DMC110 requires phantom power, available on most mixing boards.
6 Mono Mic/Line input and 2 Stereo input. 2 auxiliary outputs.
20 Mono Mic/Line input and 2 Stereo input. 4 auxiliary outputs. EQ for the 20 mono channels. XLR and TRS connections.
Jarvis Keyboard Movers provide an easy, elegant way to get your synthesizer players on and off the field. The entire cart is made of weather-resistant metal and the work surface has been treated to be non-stick and scratch-resistant, so it can handle the wear and tear of the marching season. Grommet holes in the work surface give the whole thing a clean look, while two sturdy polypropylene doors with locking handles both store and secure expensive electronic equipment. The padded handles on either side of the work surface also conveniently double as small instrument racks, giving your synth player the chance to join in on cymbal swells and special sonic moments. This cabinet comes equipped with four 8" heavy-duty casters, and stands 36.5" tall.
Rack Mount Power Center, Rack Mountable Power Strip with 8 Rear and 2 Front Mounted Switched Power Outlets.
Mono Passive Direct Box, High Quality Rugged Constructed. Transformer Balanced with 10db Pad. Used for Bass Guitar, Keyboard / Synth and Acoustic Guitar.
Stereo Passive Direct Box with high quality rugged Construction. Transformer Balanced with 10db Pad. Used for Stereo Sources like CD Players, MP3 Players Laptops Keyboard / Synth.
The Mighty GigRig® Rolling Rack System features a deep design (14U+) which allows for deeper analog and digital mixers (Yamaha 01V96, Allen & Heath Mix Wizard, Mackie Onyx, etc.). The deep design allows for rack gear to be mounted on the 6U front rack rails and additional rack gear mounted on optional 6U rear rack rails for a total of 12 rack units on the bottom.The cover is designed to be used as a stand for the GigRig and places the mixer at proper mixing height when it is open and in use or the cover can be removed for a lower workstation making the new Mighty GigRig® versatile for audio and AV applications. The cover will fit over installed XLR cable connectors (top or rear mounted).The Mighty GigRigR comes with locking casters. An optional wheel set for Marching Band/School applications is also available.- Accommodates deep mixers- Indestructible injection molded side handles- Locking twist latches- Includes wheel set with locking casters
The SKB Mighty Gig Rig Expander Rack lets you add even more rack space to your SKB19-R1-406 Mighty Gig Rig! You can securely lock a 6U extended-depth rack to your Mighty Gig Rig for a total of 12U of space on the front. The SKB Mighty Gig Rig Expander Rack allows you to internally route your cables through the bottom of the Gig Rig, so you can keep your signal processors and other sound gear in one portable, easy-to-maintain unit that's perfect for use in the studio or on the road! Expand your Rig with the SKB Mighty Gig Rig Expander Rack!
Cardioid Dynamic Microphone, Industry Standard for Vocal and Instrument Miking. Frequency Response 40-14,000 hz
Small Diaphragm Cardioid Condenser Mic, Requires Phantom Power, Rugged Build Quality, Built-n 10db Pad and Low End Roll Off. 20-20,000 Hz Frequency Response
Small Diaphragm Cardioid Condenser Mic Required Phantom Power but Will Run On AA Batteries, 40-16,000 Hz Frequency Response (A good Lower Cost Alternative To SM81)
UHF Handheld Wireless Microphone System. Includes ULXS4 Receiver and SM58 Hand Held Microphone Transmitter. (When Ordering Multiple Mics Frequency Range Has To Be Alternated)
Marching USA's Titan Field Frames are among the strongest and most rugged frames currently on the market. These frames designed specifically for touring drum corps who are transporting, competing, and rehearsing on a daily basis. This Speaker Field Frame is made of heavy gauge steel, has pneumatic tires and locking wheels. These Titan steel frames are proudly made in the USA and have a 3 year warranty.
Yamaha P5000S Delivers 750 watts @ 4 ohms or 525 watts @ 8 ohms which perfect when paired with Yamaha's CM15V or any other 15" Driver Speaker. The P5000S is equipped with Yamaha's EEEngine technology that significantly reduces power consumption and heat generation. The P5000S also includes independent swappable high-pass and low-pass filters on each channel to allow you to optimize the output for a subwoofer or full range speaker. Balanced XLR and 1/4'' jacks are included on the input side and 1/4 Neutrik Speakon and 5-way binding posts connections on the output side. Quiet variable-speed fans, on/off muting, DC detection, limiting are all on board to protect the amplifier.
The fifth generation of Yamaha Club Series Speakers feature larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon and 1/4" connectors.
2 way Floor Monitor, 15 Low Frequency Driver 2" High Frequency Driver. Requires 500 watts @ 8 ohms (P5000S matches) Includes dual 1/4 and Speakon Jacks. Angled cabinet construction for easy monitor placement.
The Yamaha CW118V Subwoofersare coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to carpeted versions, they can easily fit any need. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.Features:- 18" cast frame driver- 1200 watt peak power handling- Bass reflex design- Great for use with dance music- Specifications:- Driver: 18" Cast Frame- Frequency Response: 30Hz-2kHz- Power Handling (Watts) 300 Noise/600 Program/1200 Peak- Sensitivity: 96db- Maximum SPL: 127db- Dimensions: 22x32x25"- Weight: 71 lbs.
Yamaha's revolutionary DSR Series of active loudspeakers take full advantage of our expertise and experience amassed as one of the worlds leading pro audio manufacturers. The DSR Series feature an ideal combination of ultra-sophisticated digital sound processing and the latest acoustic technologies for Integral Digital Tuning, plus our all-new D-CONTOUR multi-band dynamic processing for Intelligent Dynamic Control. Furthermore, they harness our next-generation high power Class-D amplifiers, featuring PFC switching mode power supply for Powerful Digital Drive while power supply, amplifiers, and transducers are continuously monitored by Extensive DSP Protection. These core elements give the DSR Series the capability to deliver class leading power, extreme sound pressure levels and a listening experience that re-defines high definition audio. For loudspeakers you can count on to deliver the musicality and sound that will thrill audiences night after night, let the DSR Series power your performances to incredible new heights.
Features:
Next-generation active loudspeakers incorporating high performance DSP* all-new highpower Class-D amplifiers with PFC switching mode power supply *full range models only
Advanced digital sound processing includes: FIR-X tuning for the smoothest possible crossover transitions
High power DSP and 24-bit discrete AD and DA converters for maximum dynamic range D-CONTOUR multi-band dynamic processing provides consistent clarity at both high and low output levels
Compact and lightweight, yet capable of 1300W*(LF850W, HF450W) power output
Loudest, cleanest output of any loudspeakers in their class
*DSR118W: 800W Extensive protection of the transducers, amplifiers and power supply from high performance DSP
Premium-grade, custom-designed transducersExclusive LTBD (Long Throw, Broad Dispersion) Constant Directivity Waveguide Horns provide expansive 90 60 coverage
Stand and pole mountable, with 35mm pole sockets (DSR112, DSR115)
Yamaha's revolutionary DSR Series of active loudspeakers take full advantage of our expertise and experience amassed as one of the worlds leading pro audio manufacturers. The DSR Series feature an ideal combination of ultra-sophisticated digital sound processing and the latest acoustic technologies for Integral Digital Tuning, plus our all-new D-CONTOUR multi-band dynamic processing for Intelligent Dynamic Control. Furthermore, they harness our next-generation high power Class-D amplifiers, featuring PFC switching mode power supply for Powerful Digital Drive while power supply, amplifiers, and transducers are continuously monitored by Extensive DSP Protection. These core elements give the DSR Series the capability to deliver class leading power, extreme sound pressure levels and a listening experience that re-defines high definition audio. For loudspeakers you can count on to deliver the musicality and sound that will thrill audiences night after night, let the DSR Series power your performance.
The ideal combination of digital sound processing and Integral Digital Tuning, the DSR series of active loudspeakers deliver the musicality and sound that will thrill audiences night after night, taking performances to incredible new heights. Includes the all-new D-CONTOUR multi-band dynamic processing for Intelligent Dynamic Control and next-generation high power Class-D amplifiers, featuring PFC switching mode power supply for Powerful Digital Drive while power supply, amplifiers, and transducers are continuously monitored by Extensive DSP Protection. These core elements give the DSR Series the capability to deliver class leading power, extreme sound pressure levels and a listening experience that re-defines high definition audio.
With the combination of digital sound processing and Integral Digital Tuning, the DSR series of active loudspeakers deliver the musicality and sound that will fill any room, taking your performance to powerful new heights. Includes the all-new D-CONTOUR multi-band dynamic processing for Intelligent Dynamic Control and next-generation high power Class-D amplifiers, featuring PFC switching mode power supply for Powerful Digital Drive while power supply, amplifiers, and transducers are continuously monitored by Extensive DSP Protection. These core elements give the DSR Series the capability to deliver class leading power, extreme sound pressure levels and a listening experience that re-defines high definition audio.
The DTX‐MULTI 12 Electronic Percussion Pad features 12 trigger pads in a compact split‐level configuration and includes 1,277 drum, percussion and effects sounds. Utilizing the sound technology of the highly acclaimed Motif and DTXTREME III, the DTXM 12 will expand ANY drummer’s playing style with unlimited inspiration. The DTXM 12 also has the ability to load digital samples for endless sound possibilities and rhythmic patterns in MULTIple styles that can be triggered from the pads.
With 12 inputs, dual 300-watt digital power amplifiers and built-in digital reverb, the EMX312SC is a durable and powerful mixer that is easy to use. The first four channels have single knob compression, allowing for finer control. The mixer is stored in a hard plastic case that tilts backward for easy access, and includes numerous line level output jacks on the front panel to add whatever you want to down the line. Also included is an effects send, a monitor send, 3-band EQ, and FCL (Feedback Channel Location) which helps pinpoint offending channels when feedback occurs. The effect send is routed to the built-in DSP that provides high quality reverb effects based on the popular SPX processor series. The amplifier section uses Yamaha’s proprietary EEEngine technology for efficiency and cool operation.
With 12 inputs, dual 500-watt digital power amplifiers and built-in digital reverb, the EMX512SC is a durable and powerful mixer that is easy to use, considered the bigger brother of the EMX312C. The first four channels have single knob compression, allowing for finer control. The mixer is stored in a hard plastic case that tilts backward for easy access, and includes numerous line level output jacks on the front panel to add whatever you want to down the line. Also included is an effects send, a monitor send, 3-band EQ, and FCL (Feedback Channel Location) which helps pinpoint offending channels when feedback occurs. The effect send is routed to the built-in DSP that provides high quality reverb effects based on the popular SPX processor series. The amplifier section uses Yamaha’s proprietary EEEngine technology for efficiency and cool operation.
