The lightest tom stand DW offers, the 3900 still has two ball-and-socket clamps at the top to hold toms or cymbals, with lighter gauge tubing to keep the weight and bulkiness down. Don't worry about holding up heavy stuff though - the double-braced tripod base will take care of that. Plastic tube insulators are equipped at every connection to keep the stand nice and silent, while hinged memory locks keep you from guessing how high to put the stand every time.

The Patented Design of the 9909 Bass Drum/ Percussion Lifter not only holds a variety of tom and bass drum sizes, it also cradles any size percussion instrument, allowing it to be played with a pedal.

9000 Series Heavy Duty Single Tom & Cymbal Stand

The Gibraltar GAS-3X3 3 Panel Amp Shield is just what you need to control your sound. By placing these Plexiglass walls you can block the sound from hitting audiences head on and helps keep the sound balanced when dealing with mic'd amps.

The Gibraltar GAS2X4 4 Panel Amp Shield is just what you need to control your sound. By placing these Plexiglass walls you can block the sound from hitting audiences head on and helps keep the sound balanced when dealing with mic'd amps.

The Gibraltar 5-Piece Acrylic Drum Shield has the ability to keep the balance of your drums vs. everything else under control while not limiting your playing style - absolutely great for those energetic church gigs. Alternatively, it can be placed behind the drum set to enhance your sound which works particularly well at large outdoor venues. Cables for electronics can be easily run through the bases of the outermost panels through 'mouse holes'. Each panel is 5.5 feet tall and 2 feet wide, and fit together with no need for any tools; flexible hinges run the entire length of the connecting point, keeping the walls up and the sounds in.

Developed to give a solid mounting option for computers electronic components needed by today's musician. The Gibraltar GEMS Electronic Mounting Station is great for drummers, guitar players, keyboard players, and DJ's.

16.5" mounting arms with adjustable stoppers give ample mounting space to handle most electronics. They mount to the 1.5" T bar located at the top of the stand and fold up for easy transport. The hinged height adjustment with Gibraltar's exclusive no metal-to-metal contact points adjusts from lowest setting of 28" to 42" standing position.

The tripod base is built with 3/4" single bracing with a 20" to 28" wide tripod stance with solid foundation rubber feet on a 1 1/4" tube. The GEMS also folds together for easy transport.

Sometimes you play so hard that the wing spurs just won't keep the bass drum in place. If you need a little extra grip on your drum set, just attach the Gibraltar SC-4402 Bass Drum Anchor to the bottom of your front hoop. The grips are reversible - spiky for carpeted surfaces, and rubber-coated for hard surfaces.

The Gibraltar Deluxe Microphone Mount includes a nylon clamp with a gooseneck mount, allowing for easy stationary microphone mounting. Just tighten the dual clamp wing nut and hex nut down on the hardware, attach the gooseneck, and record away.

This microphone mount attaches directly to the lug screws inside the bass drum shell to get perfect internal microphone placement.

This 6" gooseneck fits standard mic holders and boom arms, and allows you to fully control the direction of the microphone.

The Multi Mount Microphone clamp is a gooseneck mount that fits virtually any piece of hardware in a set up, including square or round 1 1/2" rack tubes, cymbal stands, marimba frames, and any tube or piece of metal down to 5/8". Tighten the single wing nut and that's it!

Gooseneck not included.

Put your sticks literally within arm's reach by attaching this handy nylon bag to nearly any cymbal or tom stand out there. No more bending over your floor tom for an extra stick, and no more worries about breaking one during the gig! This bag is large enough to hold 6 pairs, and is held open by a metal ring so you'll never have a stick get stuck.

Gon Bop's Foot Bell is a welded mechanism connected to a stand so you can fulfill your lifetime dream of being able to play cowbell patterns with your feet. And we get it...you're a vigorous cowbell player. Don't fret! The bell is composed of heavy-duty steel with overlapped seams and a flat playing surface so every bass drum beater will be happy. The mounting bracket and adjustable leg are welded to the bell so it's essentially fool proof to use and play. However, please note that the pedal and the cowbell groupies are not included.

A Cowbell pedal stand designed to hold any size Cowbell or Tempo Block. Extra-sturdy base allows for close positioning next to Hi-Hat or other stand. Folds flat for easy transport.

The LP Super Mount-All Bracket has been improved upon with the addition of a ratchet-style tilter. The included 3/8" rod at the end of the bracket is now able to be adjusted to any angle you would need, and locks sturdily in place. The rod is also angled, for increased versatility. The bracket itself can be clamped onto any cymbal stand, and is used to attach any percussion instrument with a 3/8" mount to a setup.

Everything Rack

Stop limiting your feet to the bass drum and hi hat - with the LP Gajate Bracket, you can easily attach a cowbell, tambourine, or anything else with a 3/8" bracket to your kick pedal! This obviously means more sounds for your drum set, but anybody playing anything with their hands could greatly benefit from this extremely popular piece of hardware.

Imagine how much you could add to your conga playing if you could lay down some clave patterns with your foot (practice practice practice!), or how much funkier that cajon groove would be if it had a nasty backbeat coming from a tambourine! The Gajate is also fully adjustable, so you can put your instrument at exactly the right height.

This stand allows you to mount all three sizes of bata drums simultaneously, while also accommodating left- or right-handed players. The same sturdy base as the LP Conga Stand is included, as well as bungee cords to further stabilize the instruments.

The Latin Percussion Bar Chime Mounting Bracket securely mounts your LP chimes to any 3/8" diameter rod.

Rod and chimes not included.

This stand is designed for drum set players who wish to play timbales without standing up. For traditionalists, this stand also extends to standing height. This will fit all LP Timbales and Timbalitos with the exception of the Thunder Timbs. Includes a die-cast, heavy duty tilter assembly, double-braced legs, and large rubber feet.

This stand is a direct replacement for the stand that comes included with the purchase of the Tito Puente Thunder Timbs. Includes heavy duty die-cast tilter assembly, chrome-plated steel construction, double braced legs, and large rubber feet.

This stand is a direct replacement for the stand that comes included with the purchase of the LP Prestige Timbales. Includes heavy duty die-cast tilter assembly, chrome-plated steel construction, double braced legs, and large rubber feet.

This stand is a direct replacement for the stand that comes included with the purchase of the LP Prestige Thunder Timbs (not the original Thunder Timbs). Includes heavy duty die-cast tilter assembly, chrome-plated steel construction, double braced legs, and large rubber feet.

This stand is a direct replacement for the stand that comes included with the purchase of the LP Karl Perazzo Signature Series Timbales. Includes heavy duty die-cast tilter assembly, chrome-plated steel construction, double braced legs, and large rubber feet.

This item is a direct replacement for the stand that comes included with the purchase of the LPA256 Aspire Timbales. Includes heavy duty die-cast tilter assembly, chrome-plated steel construction, double braced legs, and large rubber feet.

* this stand is now the replacement for the M259 Matador Timbale Stand and the LPA259 Aspire Timbale Stand.

Cajons can be slippery seats, and they get uncomfortable after a while. Kill two birds with one stone with this 10" x 10" non-slip pad!

This timbale stand is no longer in production. It has been replaced by the LPA258 Aspire Timbale Stand, which will hold timbales introduced in 2009.

This stand is a direct replacement for the stand that comes included with the purchase of the LP Matador Timbales (M257). Includes heavy duty die-cast tilter assembly, chrome-plated steel construction, double braced legs, and large rubber feet.

Tall Double-Braced Double-Tom Stand for Rocker Mounts (9mm)