The DW 9934 Double Tom Stand is the same as the 9900 double tom stand with a 934 cymbal arm added for use in rear auxiliary clamp.

• Heavy-duty steel tubing
• Double-braced legs
• Easy-to-use memory locks
• Captive wing screws
• Insulated tube receivers
• Position reset handles
• Toothless tilters
• Premium-grade felt washers

---

DW Tom Stands feature ball-in-socket half-inch diameter arms, integrated auxiliary clamp and heavy-gauge tubing, and come in a multitude of configurations.

9000 Series Heavy Duty Double Tom Stand

9000 Series Heavy Duty Single Tom & Cymbal Stand

Dynasty Double Concert Tom Stand with Chrome Hardware

The Quad Mount stand can mount two drums and two cymbal arms from a single stand. When you're dragging all of your equipment or you don't have much room to work, less hardware is preferred. This works great for electronic kits too. Also included: hinged height adjustment and elliptical leg base.

This stand will hold three toms or other instruments with arms that are 0.75" to 1.25" in diameter. The stand itself can adjust from 26" to 41". Heavy-duty double-braced tripod legs help keep this stand balanced.

Foundation Tripod with Dual Platform.

Ratchet style arm in 3/4" diameter with 10" down tube. Fits many older and non-branded drum sets.

Gibraltar 7/8" Dia Ratchet Tom Arm

Ultra Adjustment with 7/8" diameter arm and a 10" down tube.

Pearl style arm with 7/8" diameter, ball style adjustment, and 10" down tube.

Hex Ball Clam Style L-Rod Tom Arm

12.7mm L-Rod on Ultra adjustment positioning and 7/8" diameter down tube.

Ultra Adjust Tom Arm with pivot L Rod 12.7mm. Ultra adjust gearless positioning gives easy infinite adjustability. Cast section with two drum key screws allows the L-rod section to be pivoted to any position. Great for mounting floor toms from stands or racks.

Rubber Feet for Double-Braced Legs - 3 Pack

Rubber Feet for Elliptical Legs - 3 Pack

Round Rubber Feet - 3 Pack

Small Round Rubber Feet - 3 Pack

This 12.7mm L-arm with a ball socket includes a 1" down-tube in case you want to mount a single tom onto your bass drum. Can be attached to any cymbal stand with a multi-clamp (not included). Works with all Gretsch toms.

Custom Double-Braced Double-Tom Stand

Pearl Double Tom Stand

Tom/Boom Stand

The TC-890 Combination Tom and Cymbal Stand features three double-braced legs for great support, no rattle-tubes for studio work, and large, non-slip rubber feet. The TC-890 also includes gear lock angle adjustment.

The TC-900 Combination Tom and Cymbal Stand features three double-braced legs for great support, no rattle-tubes for studio work, and large, non-slip rubber feet. The TC-900 also includes Uni-Lock angle adjustment.

The Roadpro Combination Tom/Cymbal Stand allows you to slim your hardware requirements by using the same stand to hold a tom and a cymbal. This stand still includes all of the features that TAMA includes with its Roadpro equipment:

• Movable Tom Positioning: By loosening the bolt on the tom holder, toms can be easily adjusted forward and back (60mm maximum).
• Quick Set Tilter: The toothless Quick-Set Tilter securely holds its position using the friction of six metal disc plates instead of traditional gears, so you can adjust it to any desired angle. This mechanism also has a more durable structure than a conventional gear tilter.
• Omni-Ball Tom Angle Adjustment: Achieve almost any angle by loosening one T-nut.
• Noiseless Design: A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.

Features:

• Quick Set Tilter
• Nylon Washers
• Omni-ball Tom Angle Adjustment
• Noiseless Design
• Die-Cast Joints
• Double Braced

The Stage Master Double Tom Stand offers two key design elements:

• Omni-Ball Tom Angle Adjustment - With one turn of the T-nut, you can fix a tom in almost any position with the spherical Omni-Ball rotator.
• Noiseless Design - A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.

This double tom stand is specifically designed for a low setting. The innovative four-legged design provides incredible stability even for larger tom settings.